Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: No-detecting SDcard
IvanMag
Newbie
Posts: 5
Permalink
Post No-detecting SDcard
on: August 16, 2012, 19:50
Quote

Sandy, what it means, when polargraph-server-mega doesn't write something about card?

POLARGRAPH ON!
Loaded machine width:1550
Loaded machine height:2000
Loaded mm per rev:95.00
Loaded motor steps per rev:800
Loaded machine name:PGXXABCD
Loaded motor step multiplier:1
Recalculated mmPerStep (0.12) and stepsPerMM (8.42)
Recalculated pageWidth in steps (13052)
Recalculated pageHeight in steps (16901)
READY_100
MEMORY,2612,END
READY_100

It is strange, because before I did see "card failed or not presented" or initializing of card. Now it keeps silent and, of course, SD doesn't work.
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: No-detecting SDcard
on: August 16, 2012, 23:37
Quote

You're absolutely right, I'd neglected to test that bit of the mega firmware. I've just fixed the problem (I hope), but you should test it carefully. I've just committed changed to the repo, so you can get the source at the usual place - polargraph_server_mega, and that also includes an updated version of the precompiled binary too (the .hex file).

See if that is any better for you. If not, you'll have to bear with me a for a bit until I get a chance to rebuild a mega+adafruit to test it on.

cheers!
sn
IvanMag
Newbie
Posts: 5
Permalink
Post Re: No-detecting SDcard
on: August 17, 2012, 09:44
Quote

Oh, yeah. It is working now. Thanks a lot!!
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: No-detecting SDcard
on: August 17, 2012, 13:35
Quote

No problem! There might be some other issue with that build as well though, so if anything isn't working like you think it should, just mention it here and I'll have a look.
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.016 seconds.