====== Head ======

===== Table of Contents =====
  - [[firmware]]
  - [[battery]]
  - [[arm]]
  - [[leg]]
  - [[head]] **Current section**
  - [[body]]
  - [[merge]]
  - [[cover]]
  - [[tune]]

Prev < [[leg]]\\
Next > [[body]]
----

===== Parts List =====
Parts list of the head is enumerated below.

^Name                                                                             ^  Q'ty  ^
|[[https://github.com/plenprojectcompany/PLEN2/blob/master/stl/head.stl|head.stl]]|  1     |
|[[https://github.com/plenprojectcompany/PLEN2/blob/master/stl/chin.stl|chin.stl]]|  1     |
|Head Board                                                                       |  1     |


===== Print Detail =====
[[specifications/print_detail/head]]


===== Assembling Process =====
==== Parts List ====
{{:tutorials:plen2:head:00_parts_list.jpg?direct}}

==== Attach Head Board ====
**Attention!**:
In attaching the chin and the head board, head-board's cable pass through inside the barb.

{{:tutorials:plen2:head:01_through_cable.png?direct}}

**Attention!**:
Please fit eyes' leds grooves on the chin.
When it was completed, please tighten eyes' hexagonal nuts.

{{:tutorials:plen2:head:02_attach_head_board.png?direct}}

==== Finished Head ====
{{:tutorials:plen2:head:03_attach_head.jpg?direct}}

----
Prev < [[leg]]\\
Next > [[body]]